1.4432
X2CrNiMo17.12.3, 1.4432, X2CrNiMo17.12.3,
1.4432數據表下載
1.4432化學成分 - BS EN 10028-7
| C | Si | Mn | P | S | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|
| ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.015 | 16.50-18.00 | 10.50-13.50 | 2.50-3.00 | ≤0.11 |
1.4432標準規范
- BS EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- BS EN 10088-1 - Stainless steels - Part 1: List of stainless steels
- BS EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- BS EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- BS EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
- BS EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
- BS EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- BS EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
- BS EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- BS EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
- BS EN 10263-5 - Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
- BS EN 10272 - Stainless steel bars for pressure purposes
- BS EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
1.4432機械性能
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | 最小值 | 最大值 | 近似值 | 備注 |
|---|
| 熱處理 | Type | 最小值 | 最大值 | 近似值 | 備注 |
|---|
1.4432產品形態
- 熱軋和冷拉棒材, 圓棒, 扁鋼, 六角棒, 八角棒, 空心棒
- 帶鋼和鋼卷, 熱軋帶鋼, 熱軋鋼卷, 冷軋鋼帶, 冷軋鋼卷
- 冷軋板材, 熱軋板, 冷軋薄板, 中厚板, 高強鋼板
- 熱軋和冷拉異型鋼, 凹凸字鋼, 滑軌, 滑塊
- 熱軋和冷拉鋼絲, 扁絲, 盤條, 直條
- 自由鍛和模鍛, 扁鋼, 模塊, 環, 桶, 餅, 階梯軸及定制化
- 熱擠壓和冷軋無縫管, 異型管, 方管, 毛細管
- 電渣錠