304 L化學成分 - A 182/A 182M (2012)

C	Si	Mn	P	S	Cr	Ni	N
≤0.030	≤1.00	≤2.00	≤0.045	≤0.03	18.0-20.0	8.00-10.0	≤0.10

---

304 L標準規(guī)范

• A 182/A 182M (2012) - Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
• A 213/A 213M (2011) - Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
• A 240/A 240M (2012) - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• A 249/A 249M (2010) - Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• A 269 (2010) - Seamless and Welded Austenitic Stainless Steel Tubing for General Service
• A 270 (2010) - Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
• A 276 (2010) - Stainless Steel Bars and Shapes
• A 312/A 312M (2012) - Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
• A 314 (2008) - Stainless Steel Billets and Bars for Forging
• A 358/A 358M (2008) - Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
• A 403/A 403M (2012) - Wrought Austenitic Stainless Steel Piping Fittings
• A 409/A 409M (2009) - Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
• A 473 (2009) - Stainless Steel Forgings
• A 478 (2008) - Chromium-Nickel Stainless Steel Weaving and Knitting Wire
• A 479/A 479M (2011) - Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
• A 493 (2009) - Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
• A 511/A 511M (2012) - Seamless Stainless Steel Mechanical Tubing
• A 554 (2011) - Welded Stainless Steel Mechanical Tubing
• A 580/A 580M (2012) - Stainless Steel Wire
• A 632 (2009) - Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
• A 666 (2010) - Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
• A 688/A 688M (2012) - Welded Austenitic Stainless Steel Feedwater Heater Tubes
• A 774/A 774M (2009) - As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
• A 778 (2009) - Welded, Unannealed Austenitic Stainless Steel Tubular Products
• A 793 (2009) - Rolled Floor Plate, Stainless Steel
• A 813/A 813M (2009) - Single- or Double-Welded Austenitic Stainless Steel Pipe
• A 814/A 814M (2008) - Cold-Worked Welded Austenitic Stainless Steel Pipe
• A 943/A 943M (2009) - Spray-Formed Seamless Austenitic Stainless Steel Pipes
• A 959 (2011) - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
• A 965/A 965M (2012) - Steel Forgings, Austenitic, for Pressure and High Temperature Parts
• SAE AMS 5511H (2003) - Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated
• SAE AMS 5647J (2011) - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, And Rings 19Cr - 9.5Ni Solution Heat Treated
• SAE AMS-QQ-S-763B (1998) - Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
• SAE J 2515 (1999) - High temperature materials for exhaust manifolds
• SAE J 405 (1998) - Chemical compositions of SAE wrought stainless steels
• SAE J 467 (1968) - Special Purpose Alloys ("Superalloys")

---

304 L機械性能

Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

---

304 L產(chǎn)品形態(tài)

• 熱軋和冷拉棒材, 圓棒, 扁鋼, 六角棒, 八角棒, 空心棒
• 帶鋼和鋼卷, 熱軋帶鋼, 熱軋鋼卷, 冷軋鋼帶, 冷軋鋼卷
• 冷軋板材, 熱軋板, 冷軋薄板, 中厚板, 高強鋼板
• 熱軋和冷拉異型鋼, 凹凸字鋼, 滑軌, 滑塊
• 熱軋和冷拉鋼絲, 扁絲, 盤條, 直條
• 自由鍛和模鍛, 扁鋼, 模塊, 環(huán), 桶, 餅, 階梯軸及定制化
• 熱擠壓和冷軋無縫管, 異型管, 方管, 毛細管
• 電渣錠

---